PRECISION LASER CUT BLACK STEEL – 4 PILLARS 
Top Supports are 190 x 210 x 4mm
base plate dimensions 220 x 270mm x 6mm

ProAc Response D2R WALNUT

Nominal Impedance: 8 ohms
Recommended Amp: 30-150W
Freq Response: 30hz-30Khz
Sensitivity: 88.5dB (1W @1m)
Bass: glass fibre weave cone
Magnet: Excel Magnet
Plug: copper phase, oxygen cable
Tweeter: 1″ silk dome

HEGEL H190v INTEGRATED AMPLIFIER

Power output: 2*150W in 8 ohms @ 1kHz 1% THD, 100/120/230V AC
Minimum load: 2 ohms
Analog inputs: 1*Balanced (XLR), 2*Unbalanced (RCA)
Phono input: 1*Unbalanced (RCA) for Moving Magnet (MM)
Digital inputs: 1*Coaxial S/PDIF, 24/192, 3*Optical S/PDIF, 24/96, 1*USB, 24/96, 1*Network, 24/192
Line level outputs: 1*Unbalanced fixed (RCA), 1*Unbalanced variable (RCA)
Streaming: AirPlay, Roon Ready, Spotify Connect, UPnP
Streaming formats: MP3, WAV, FLAC, ALAC, AAC, PCM, Ogg

The Response D18 has proven to be one of ProAc’s most successful loudspeakers receiving critical worldwide acclaim. However, the D18 is only available with a dome tweeter, so to satisfy demand for people wanting a ribbon tweeter ProAc has redesigned the D18 using an upgraded cabinet with new bass loading, new crossover network and the ProAc ribbon tweeter used in other ProAc models.

This new exciting model is called the D20R and with the upgrades the sound quality has improved in all areas. Improvements comprise of a new cabinet with bass loading used in D30 and D40 models. A new crossover network and a ProAc ribbon tweeter as used in D30 D40 K6. The result is a wonderful open and expansive midrange with a substantial bass, ProAc ribbon tweeter giving sweet and detailed high frequencies, a large sound stage is also a bonus.

SPECS

Nominal Impedance

8 ohms

Recommended Amplifiers

20 to 180 watts

Frequency Response

28Hz to 33KHz

Sensitivity

88.5 dB linear for 1 watt at 1 metre

Bass Driver

6.5″ (165mm) ProAc unit fitted features glass fibre weave cone, Excel Magnet system and unique acrylic damping phase plug.

Tweeter

ProAc ribbon 60mm by 10 mm as light as a human hair, with rear chamber damping.

Crossover

Finest components on dedicated circuit board. Multi-strand oxygen free copper cable throughout. Split for optional bi-wiring or bi-amplification.

Dimensions

Height: 38.4″ (960mm) plus Spikes

Width: 7.6″ (190mm)

Depth: 9.1″ (227mm)

Plinth:

Width: 9.2″ (230mm)

Depth: 13.6″ (305mm)

Weight

26Kg each

Mode

Floor Standing

Grille

Acoustically transparent crimplene

ProAc loudspeakers have a reputation for exceptional sound and build quality. Our enclosures may look conventional but this hides the advanced technology required to build a rigid and well damped cabinet. All our loudspeakers are made in our factory in Brackley in England finished in gorgeous real wood veneer and are now available with a choice of either a dome or ribbon tweeter.

The Response D2 has already been in production for 15 years with the dome tweeter and is now considered to be a much respected model. We now have the option to offer this model with a ribbon tweeter as we do with some of our other models. The ribbon tweeter is the same tweeter used in our floor standing models and offers a refreshing alternative to those seeking a high quality stand mounted design.

Drivers: Two-way, stand-mounted, reflex-loaded loudspeaker. Drive-units: 2.75″ (70mm) ProAc ribbon tweeter, 6.5″ (165mm) SEAS/ProAc midrange/woofer. Sensitivity: “88.5dB.” Recommended amplifier power: 30–150Wpc.
Dimensions: 17″(430mm) H × 8″ (203mm) W × 9.75″ (248mm) D. Weight: 24.2lb (11kg)

Nominal Impedance: 8 ohms
Recommended Amp: 30-150W
Freq Response: 30hz-30Khz
Sensitivity: 88.5dB (1W @1m)
Bass: glass fibre weave cone
Magnet: Excel Magnet
Plug: copper phase, oxygen cable
Tweeter: 1″ silk dome
Weight: 11kg

FINISH WALNUT