Turntables – Tonezone Audio https://tonezoneaudio.com Audio Video Home Theater & HiFi in Saudi Arabia Thu, 02 Apr 2026 20:03:06 +0000 en-US hourly 1 https://wordpress.org/?v=5.0.21 https://tonezoneaudio.com/wp-content/uploads/2021/07/cropped-logo-32x32.png Turntables – Tonezone Audio https://tonezoneaudio.com 32 32 Hegel V10 Phono Stage MM – MC https://tonezoneaudio.com/product/hegel-v10-phono-stage-mm-mc/ Sun, 20 Oct 2024 22:11:26 +0000 https://tonezoneaudio.com/?post_type=product&p=6341

EISA Phono Stage 2021 - 2022

the V10 with gold-plated terminals, balanced XLR outputs,  ultra-low-noise discrete JFET transistors for both the Moving Magnet (MM) and Moving Coil (MC) input

]]>  

Technical Specifications

Amplifier Typology: Ultra low noise discrete JFET transistor input stage for both MC and MM
Gain XLR Out MM: 40dB / 45dB / 50dB / 52dB
Gain XLR Out MC: 60dB / 65dB / 70dB / 72dB
Gain RCA Out MM: 34dB / 39dB / 44dB / 46dB
Gain RCA Out MC: 54dB / 59dB / 64dB / 66dB
MC Load Impedance: Freely adjustable between 33 and 550 ohm / 47 kohm
MM Load Capacitance: 100pF / 147pF / 220pF / 247pF / 320pF / 420pF / 467pF @ 47 kohm
Subsonic Filter: Switchable on / off, -3dB at 20Hz, -18dB octave
RIAA Accuracy: +/- 0,2dB / 20Hz – 20kHz
Output Noise*: -84dB/MM (“A” weighted ref: 0dBV), -81dB/MC (“A” weighted ref: 0dBV)
Output Impedance XLR / RCA: 200 ohm
Channel Crosstalk: -84dB @1kHz 0dBV
Frequency Response: 2Hz – 20kHz
Distortion (THD) MM: < 0.005% @1kHz 0dBV
Distortion (THD) MC: < 0.009% @1kHz 0dBV
Inputs: 1 x unbalanced (RCA) MM, 1 x unbalanced (RCA) MC
Outputs: 1 x unbalanced fixed (RCA), 1 x balanced fixed (XLR)
Power Adapter: Hegel Power Adapter M30103
Dimensions with Feet: 6cm x 21cm x 28cm, 2.4″ x 8,3″ x 11″ (H x W x D)

]]> THORENS TD 403 DD with cartridge Ortofon 2 M Blue https://tonezoneaudio.com/product/thorens-td-403-dd-turntable/ Sun, 20 Oct 2024 20:04:16 +0000 https://tonezoneaudio.com/?post_type=product&p=6327

the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntable Ortofon 2 M Blue WITH standard SME connector headshells 

]]>

* AVAILABLE IN BOTH BLACK AND WALNUT

New Thorens direct drive turntable TD 403 DD

Special Features

  • Stable and super silent direct drive
  • THORENS TP 150 tonearm
  • Detachable SME Headshell
  • Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
  • Pre installed cartridge Ortofon 2 M Blue

]]> THORENS TD 1500 TURNTABLE https://tonezoneaudio.com/product/thorens-td-1500-turntable/ Sun, 20 Oct 2024 19:46:01 +0000 https://tonezoneaudio.com/?post_type=product&p=6322

New Thorens Turntable TD 1500 FEATURES / DC motor / spring-suspended sub-chassis / XLR outputs in addition to the usual pair of RCA / standard SME connector headshells / cartridge Ortofon 2 M Bronze

]]>

* AVAILABLE IN BOTH BLACK AND WALNUT

Newly developed Thorens TP 150 tonearm

The new TP 150 tonearm is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.

A high-quality and pre-adjusted 2M Bronze pickup from  Ortofon, is also supplied as standard. This proves to be a perfect playing partner due to its naked diamond with Fine Line cut.

 

Special Features

  • Sub chassis with three conical springs
  • Belt drive with polished precision belt
  • Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
  • Pre-installed cartridge Ortofon 2 M Bronze
  • Electronical controlled motor
  • balanced (XLR) and unbalanced (RCA) output
  • Thorens precision tonearm TP 150

]]> THORENS TD 1601 TP 160 TURNTABLE – WALNUT https://tonezoneaudio.com/product/thorens-td-1601-tp-160-turntable-walnut/ Sun, 20 Oct 2024 19:25:31 +0000 https://tonezoneaudio.com/?post_type=product&p=6317

THE MULTI-AWARD-WINNING TD 1601 WITH IMPROVED TONEARM TP 160

]]>

Special Features

  • Stabilized sub chassis on three conical springs
  • Precision pivot bearing tonearm TP 160 with SME headshell connector
  • Machined precision belt
  • Two-part machined aluminum platter
  • Adjustable belt tension
  • Electronically controlled synchronous motor
  • Patented electric lift
  • Touchless shut-off mechanism
  • True balanced (XLR) and (RCA) outputs
  • External linear power supply TPN 1600

]]> goldring Goldring E3 MOVING MAGNET CARTRIDGE https://tonezoneaudio.com/product/goldring-goldring-e3-moving-magnet-cartridge/ Sun, 20 Oct 2024 18:48:16 +0000 https://tonezoneaudio.com/?post_type=product&p=6316

Goldring E3 MM CARTRIDGE USES Magnetic Duplex Technology™-a 'dual magnet' generator assembly

   ]]>

Reviews

“It produces a classic vinyl sound, warm, relaxed and effortless…”
The Ear

“A superbly realised cartridge that will work well with the majority of affordable turntables.”
What Hi-Fi?, 5 Stars & 2020 Award Winner

“It brought out every note with a precision I never imagined a moving magnet could muster.”
Stereophile

“The Goldring E3 is the top of the company’s entry-level series and offers a smooth, very balanced sound.”
CNET

“…it is one of the best budget cartridges, at this price point, currently for sale on the market.”
The Audiophile Man, 9/10, Deeply Groovy

“… I still feel I’m not expressing how impressed I am with this “budget” cartridge, it is an amazing value for its price point and easily one of the best among other cartridges not only in its price pool, but even some higher ones. Highly, highly recommended bang for your buck. Big sound with a small price.”
Needles & Grooves

SPECIFICATIONS

Cantilever Aluminium
Stylus profile Elliptical
Stylus radius
0.3 x 0.7 mil
Frequency range
20 Hz – 20 kHz
Channel balance
1.5 dB at 1 kHz
Channel separation
>20 dB at 1 kHz
Sensitivity
3.5 mV (1 kHz @ 5 cm/sec)
Static compliance 20 mm/N
Vertical tracking angle 20°
Load resistance 47 kΩ
Load capacitance
100 – 200 pF
Internal inductance 400 mH
Internal resistance 410 Ω
Cartridge mass 6.9 g
Fixing centres
12.7 mm (0.5 in)
Playing weight
1.5 g – 2.5 g (2.0 g recommended)

 

]]> Goldring E4 MOVING MAGNET CARTRIDGE https://tonezoneaudio.com/product/goldring-e4-moving-magnet-cartridge/ Sun, 20 Oct 2024 18:19:31 +0000 https://tonezoneaudio.com/?post_type=product&p=6314

Goldring introduces its flagship E Series moving magnet cartridge: E4. Designed as the ultimate upgrade for any modern budget or midrange turntable, E4 represents the pinnacle of E Series engineering and performance.

 ]]>

Key features at a glance:

  • New super-elliptical nude diamond stylus features lower effective tip mass, improved rigidity and better high frequency detail retrieval than ‘bonded’ elliptical alternatives.
  • The lightweight and superior stiffness of the hollow aluminium cantilever allows the stylus to trace medium-to-high frequencies with greater accuracy.
  • Magnetic Duplex Technology™ allows a more accurate transcription of the stereo groove which results in a more accurate soundstage
  • Expert adjustment facility: Unlike most designs, E4 allows micro-adjustments to be made during the production process, ensuring each cartridge leaves the Goldring factory with optimised channel balance and crosstalk settings

SPECIFICATIONS
Frequency Range
18 Hz – 24 kHz
Channel Balance
better than 1.5 dB @ 1 kHz
Channel Separation
> 24 dB @ 1 kHz
Sensitivity
3.5 mV (1 kHz @ 5 cm/s)
Static Compliance
22 mm/N
Vertical Tracking Angle 20°
Stylus Radius
7.6 micron (0.3 x 0.7 mil)
Stylus Type
Nude eliptical
Load Resistance 47 kΩ
Load Capacitance
100 – 200 pF
Internal Inductance 400 mH
Internal Resistance 410 Ω
Cartridge Mass 6.9 g
]]> Goldring Ethos SE MOVING COIL CARTRIDGE https://tonezoneaudio.com/product/goldring-ethos-se-moving-coil-cartridge/ Sun, 20 Oct 2024 17:58:15 +0000 https://tonezoneaudio.com/?post_type=product&p=6311 Goldring, introduces Ethos SE - a special edition of its award-winning Ethos model. Sitting at the very top of Goldring's range of moving coil cartridges, Ethos SE combines uncompromising engineering with unique new features to produce a cartridge of exquisite sound reproduction capabilities. ]]>  

Key features at a glance:

  • New pure silver coils feature fewer windings with higher conductivity, reducing the effective tip mass and internal impedance of the pick-up for improved tracking and greater transient response.
  • Low-mass cross-armature core made from Swedish iron improves channel separation and produces a more realistic soundstage.
  • A vital line-contact diamond stylus features a narrow, low tip-mass, large contact-area that enhances high-frequency response and minimises distortion and colouration.

SPECIFICATIONS

Frequency Response
20 Hz – 20 kHz ± 2 dB
Frequency Range
12 Hz – 32 kHz
Channel Balance
within 1 dB @ 1 kHz
Channel Separation
better than 30 dB @ 1 kHz
Sensitivity
0.35 mV ± 1 dB, 1 kHz @ 5 cm/sec
Static Compliance
28 mm/N
Trackability
90 um (@ 315 Hz)
Equivalent tip mass
0.34 mg
Vertical Tracking Angle
20 °
Stylus Profile:
Vital line-contact
Stylus Radius
35 x 8 µm (0.3 mil)
Stylus Type
Factory Replaceable
Load Resistance
100 Ω
Load Capacitance
100 – 500 pF
Internal Inductance
3.5 µH
Internal Resistance
3.8 Ω
Cartridge Mass
7.7 g
Cartridge Mass (inc. fixings)
8.5 g (without stylus cover)
]]> clearaudio smart phono V2 MM and MC preamplifier https://tonezoneaudio.com/product/clearaudio-smart-phono-v2-mm-and-mc-preamplifier/ Sun, 20 Oct 2024 16:42:24 +0000 https://tonezoneaudio.com/?post_type=product&p=6306

A minimalist aluminium housing that contains one of the best sounding phonostages in its market. Up to 54 decibels gain at one kilohertz and an extremely linear frequency response deliver unprecedented quality at this price point. For MM and MC

   ]]> Mode: MM / MC switchable by jumpers (at bottom)
Subsonic filter switchable by jumpers (at bottom) Amplification: 34dB (MM mode)
54dB (MC mode) Input load: 50 Ω, 100 Ω, 500 Ω, 1 kΩ,
5 kΩ / 150 pF, 250 pF, 400 pF (MC mode)
47 kΩ / 150 pF, 250 pF, 400 pF (MM mode) RIAA accuracy: ± 0.3dB @ 10Hz – 100kHz THD: < 0.004% MC (“A” @ 1kHz / -1dB @ MAX) Signal to noise ratio: 85dB (A) (MM mode)
72dB (A) (MC mode) Headroom: 18dB / MC (Gain Control on MAX) Max. output voltage: 10V eff. (1kHz) RIAA: delay time: 75μs / 318μs / 3180μs Channel seperation: > 90dB @ 1kHz Output impedance: 75Ω Inputs: unbalanced (RCA) Outputs: unbalanced (RCA)
optional headphone output (Jack: 3.5mm) Power consumption: Max. consumption: 2.7 watts
Consumption in operation: 2.7 watts
Off mode: 0.0 watts Power supply: ± 18V DC / 300mA (external power supply)

 

Superbly designed and built entry-level phonostage with an extremely clean, yet surprisingly full-bodied sound.

HIFI WORLD

                                      

 

 

 

]]> Clearaudio concept Signature + Verify Tonearm + Goldring E3 CARTRIDGE https://tonezoneaudio.com/product/clearaudio-concept/ Wed, 29 Sep 2021 07:27:05 +0000 http://136.244.91.106/?post_type=product&p=2389

A MULTI AWARD PACKAGE the concept signature created a revolutionary sound package along with Verify Tonearm improved with Goldring E3 CARTRIDGE

“A superbly realised cartridge that will work well with the majority of affordable turntables.” What Hi-Fi?, 5 Stars & 2020 Award Winner ]]>

PACKAGE COMBINATION

The DC motor CONCEPT SIGNATURE TURNTABLE
+
Super solid carbon fibre Verify Tonearm
+
GOLDRING E3 AWARD WINNER MM CARTRIDGE

Stylus profile – Elliptical
Stylus radius- 0.3 x 0.7 mil
Channel separation – >20 dB at 1 kHz
Sensitivity – 3.5 mV (1 kHz @ 5 cm/sec)
Load resistance – 47 kΩ
Load capacitance -100 – 200 pF
ARM Construction details Radial tonearm
With friction free magnetic bearing technology
Material Aluminium (silver), Aluminium tonearm tube (silver)
CONSTRUCTION DETAILS Resonance-optimised bodywork; body comprises medium-density wood fibre or pressure-formed solid wood; upper layer incorporates high-tech satined plastic compound.
SPEED RANGES Electronic speed selection, 33 ⅓, 45 rpm (78 rpm optional)
DRIVE UNIT Decoupled and resonance damped DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
BEARING Polished and tempered steel shaft in a sintered bronze housing, running on a Teflon thrust-pad.
PLATTER Synthetic material, CNC precision milled surface; 30mm / 1.18 inch thickness; aluminum sub-platter
]]>